The university provides information outlets in classrooms through the Zengaku (University-wide) Information Outlet and Network System. Formerly called the “Authenticated Network System”, we changed its name to avoid confusion. The authentication methods were also changed on July 22, 2010.

For information on available access areas and user eligibility, see the User’s Guide.

Important:

Please refer to the relevant notes prior to usage.

Before you connect: step-by-step instructions

Requirements

• A PC equipped with a 10Base-T, 100Base-TX, or 1000Base-T wired LAN connection
• LAN cable (UTP, standard straight type)
• Web-browsing software

Pre-configuration

• Set your OS to automatically acquire its IP address from a DHCP server.

How to connect

1. Connect one end of the LAN cable to your PC’s LAN interface and the other end to the information outlet in a classroom.
2. Access the following URL page via Web browser and press the button after you have carefully read and agree to the terms of use. (Note: the login page will be displayed only when your devices is connected with Zengaku (University-wide) Information Outlet and Network System.)
   https://webauth05.cc.tsukuba.ac.jp:8443
3. Enter your user ID (UTID-13) and password on the next page and press the “Login” button. Your PC will be connected if successful.

Limitations

• Our university does not allow any in-bound connections whose destination ports are 1-1023/TCP or in the 1-1023/UDP range. Other ports and protocols are not limited at this time.

IP addresses

Other Information

Temporary Account Service

In the User’s Guide, we guide about a temporary account service for visitors.
Temporary Account Service

[Confirmed consistency at 2016-11-07T14:45 with the Japanese version 2016-05-12]